Nearly four years at Auburn University, with the rocketry club, the AIAA chapter and the combustion lab alongside. A summer internship at Lockheed Martin in 2024, then full time there from June 2025. FusionSpace and robotics mentoring since mid-2026.
-
Auburn University
-
Aerospace engineering, second major in computer science Aug 2021 to May 2025 graduated cum laude
-
-
Rocketry club
-
Structural engineer, NASA Student Launch payload Sep 2021 to Apr 2023
-
Junior lead, Argonia Cup payload Apr 2022 to Apr 2023
-
Senior lead, payload Apr 2023 to Apr 2024
-
President Apr 2024 to May 2025
-
-
AIAA chapter
-
Member Apr 2022 to Apr 2023
-
President Apr 2023 to Apr 2024
-
-
Combustion lab
-
Undergraduate researcher Dec 2022 to May 2025 AIAA SciTech paper, Jan 2026
-
-
Lockheed Martin
-
Hardware quality engineering intern May 2024 to Aug 2024
-
Associate software engineer Jun 2025 to Aug 2026 promoted
-
Software engineer Aug 2026 to now
-
Team planner, quarterly program increments Mar 2026 to now
-
-
FusionSpace
-
Open-source rocketry software Jun 2026 to now HPR Sim 0.1.0, Oct 2026
-
-
BEST Robotics
-
Volunteer mentor Aug 2026 to now
-
FusionSpace
Outside work I build free, open-source software for hobby and high-power rockets under the name FusionSpace.
HPR Sim
HPR Sim flies a rocket from the launch rail to the ground, in six degrees of freedom until its parachute opens. Version 0.1.0 came out in October 2026 and installs from crates.io, PyPI, Homebrew and Scoop. I decide what it does and how it’s built. Every change is re-flown against RocketPy, another open-source flight simulator, with both given the same inputs. On 9 whole flights and 5 parachute descents, all 172 gated values are within tolerance.
Agreeing with RocketPy shows HPR Sim computes what RocketPy computes. Only real flights show whether either matches the world, and on those HPR Sim isn’t there yet. On 12 public flights its apogee misses the altimeter’s by 8.9% on average, against a 5% target. On 60 more from a private collection it misses by 12.1%, and OpenRocket by 11.3%. Fig. 2 shows the public flights.
On real flights HPR Sim works out its own drag. Given each team’s own drag estimate, it misses the 7 flights compared as soon as they were flown by 3.5% on average. Juno III and Lince still miss by more than 5% that way. A team’s estimate can be tuned to its own flight, so this isn’t proof, but it makes drag the first place to look. No cause is claimed yet for the other 5 public flights or the private collection. Drag is what I’m working on now.
Compared as soon as flown: 7 flights, 6.1% average miss
-
Prometheus, Western Engineering, Spaceport America Cup 2022 −8.9%
-
Juno III, Projeto Jupiter, Spaceport America Cup 2023 −6.4%
-
Genesis, EuRoC 2023 −5.9%
-
Bella Lui, EPFL Rocket Team, 2020 +1.1%
-
Lince, EuRoC 2023 +4.0%
-
Cavour, Politecnico di Torino, EuRoC 2023 +5.8%
-
NDRT 2020, Notre Dame Rocketry Team +10.4%
Predicted first: 5 flights, 12.8% average miss
-
Macie XL, flight 2 −29.2%
-
Macie XL, flight 1 −16.2%
-
Erebus 11, BME Suborbitals, EuRoC 2022 −8.0%
-
Astra, Faraday Rocketry UPV, EuRoC 2022 −6.5%
-
Andromeda, Aristotle Space and Aeronautics Team, EuRoC 2022 +4.1%
From HPR Sim’s real-flight, private-collection and validation reports, commit 201814d, November 20, 2026. Its accuracy page lists every check and every known gap.
Motor Finder
Motor Finder shows which U.S. high-power rocket motors are in stock. It checks 12 vendors every hour. On November 21, 2026 it tracked 598 motors, and 180 of them were in stock. The data is free to use through a public API.
Hardware





Auburn University
I was in the Auburn University Rocketry Association for nearly four years. I started on the structures side of the NASA Student Launch payload and led payload work for two years. In my last year I was president. By then the club had more than 50 active members and flew three competition missions that year.
In the Combustion Physics Lab I built test hardware for rotating detonation engine research. One piece was a water-cooled combustion chamber you could see through. I’m a co-author on Design and Test of an Augmented Spark Igniter With Interchangeable Flow Control Orifices, AIAA SciTech 2026.
Mentoring
Since August 2026 I’ve helped a middle-school BEST Robotics team in south Alabama write and debug its robot’s autonomous code. This season the team placed third in robot performance at its regional and goes on to the next round in December.